LEO Progress: J-2X to Test Stand A1

“Nothing behind me, everything ahead of me, as is ever so on the road.”
– Jack Kerouac, On the Road

Recently, J-2X development engine 10002 was on the road.  If you remember, E10002 went through a six-test series on test stand A2 that began in February and finished up in April.  The next planned phase of E10002 testing is on test stand A1.  In between these series, the engine was back in the assembly area of NASA Stennis Space Center Building 9101.

1038170

This respite between test series allowed for a complete series of inspections of the engine hardware.  This is vital piece of the learning process for engine development.  The basic truth is that a rocket engine is just darn tough on itself when it fires.  The reason that we test and test and test is to make sure that our design can stand up to the recurring brutal conditions.  The chance to look for the effects of that testing through detailed inspections away from the test stand is an opportunity to collect a great deal of useful information.

Also, even before the engine arrived at the assembly area, the stub nozzle extension was removed.  This was done while the engine was still installed in the test stand.  Remember, the testing on test stand A2 was performed with a passive diffuser and so we were able to use an instrumented stub nozzle extension to examine the nozzle thermal environments.  On A1, there will be no diffuser.  We’ll be firing straight into the ambient Mississippi afternoon and so we’ll not have any nozzle extension attached.  The other change made to the engine — this one made while in the assembly area — was that we swapped out the flexible inlet ducts so that we can use our specially instrumented ducts for the gimbal testing on A1.  These ducts will provide a great deal of unique data when we gimbal the engine and force the inlet ducts to twist and bend and they are designed to do.

Below is my favorite picture from the recent assembly activities for E10002 back in Building 9101.

1038171

“FOE” stands for “foreign object elimination.”  I love this picture because it is a demonstration of how dedicated and meticulous are our assembly techs and how much basic integrity they bring to their job every single day.  In the rocket engine business we tend to be fanatics about foreign objects (i.e., random debris of unknown origin) hanging around.  The reason for this is that if you spend enough time in the business, you will eventually have a story of what happens when trash gets into the engine.  The rocket in question might be an amazingly powerful beast pumping out five hundred pounds of propellant per second generating 300,000 pounds of thrust, but all it takes is one bit of junk in the wrong place to destroy the whole thing in fractions of a second.

In the picture above is a small nut that was found in the periphery of the assembly area.  Shoot, if this was my garage you’d be lucky to find a clean patch not strewn with various bits of stuff like nuts, bolts, wads of duct tape, old hunks of sandpaper, that lost pair of pliers, a “Huey Lewis and the News” cassette, or, well, who knows what.  But the rocket engine assembly area is NOT my garage (thank goodness).  When something is found like a stray nut in the picture above, that sets off an investigation.  Where did it come from?  How did it get loose?  What procedure allowed this nut to escape control?  This is serious stuff.  Yet, just think about how easy it would have been for a tech to see that stray nut, pick it up, and stick it in his pocket.  They could have avoided the whole minor investigation thing entirely.  But that’s not what they did and that is not what they do.  Because they know that if they do not show the necessary integrity and methodical approach to continue to learn and perfect our procedures, then the next stray nut could be lodged where it could do terrible damage.

Here are the techs moving E10002 out of its assembly bay and unpacking it for transport.

1038172

And a couple more pictures of the process in Building 9101.

1038173

Here’s the engine ready for the road, then being lifted up the side of the test stand, and then sitting in the porch area while sitting on the engine vertical installer.  I really enjoy the pictures of the engine trucking about sunny NASA SSC.  That picture was the inspiration for including the Jack Kerouac quote at the beginning of the article.  It’s bright and shiny and full of so much thrill and promise.

1038174

All of this should look reasonably familiar.  It is the process that we follow, more or less, whenever we take an engine out to the stand.  Getting the engine into and out of A1 is a bit easier since you don’t have to deal with moving the diffuser out of the way, but they’re really quite similar.  The slightly different flavor that we’ve got for this testing is the addition of the thrust vector control system.  In the picture below you can see where these hang.  The engine mounts up with the gimbal bearing to the stout, yellow thrust take-out structure.

1038175

The two hydraulic actuators are also attached to the thrust take-out structure but slightly outboard and at 90 degrees apart.  These actuators are what will swing the engine around as if we were steering a vehicle.  Here, below, is another, closer view of the thrust take-out structure and the actuators.

1038176

In the picture below, E10002 is mounted up to the thrust take-out structure.  The gimbal bearing is the shiny object towards which the arrow is pointing.  If you look over to the right side of the picture, you can see one of the “scissors ducts,” i.e., the flexible propellant inlet ducts.

1038177

The next picture shows one of the hydraulic actuators hooked up to the engine.  As you can see the tolerances are awfully tight.  That’s an important vehicle integration consideration.  If this was a vehicle stage rather than a test stand to which we were attaching the engine, the thrust structure and the actuators would be the responsibility of the stage manufacturer.  Making sure that the stage and the engine can work together in such close quarters takes a great deal of vigilance between the two teams.

1038178

So, you’re probably asking yourself, to what do these actuators connect on the engine?  That’s a very good question.  It certainly isn’t obvious from the assembly pictures.  The actuators connect to the forward manifold of the main combustion chamber (MCC).  Below is a computer model of the MCC with the two actuator attachment points shown.

1038179

The MCC is really the heart of the whole engine, the sturdy framework stuck right in the middle, so it makes sense that when you want to push the engine around, this is what you’d have to push.  This final picture below of the engine completely mounted into the stand.  Again, it’s amazing to think about that whole thing being able to move about and not having one component run into another component or the actuators or the stand.  It is quite the integration miracle.

1038180

Testing for E10002 on test stand A1 will commence in June.  So, if all goes well, for the next J-2X update, I’ll be able to link in a video of the engine firing and twisting about.

BTW, NASA is in the process of swapping software used for posting blog articles and comments and such.  As part of this process, they have to shut down the capability to accept input comments for a short time, specifically the first two weeks of July 2013.  Sorry about that.  But after that, it ought to be up and running as normal.

9 thoughts on “LEO Progress: J-2X to Test Stand A1”

  1. I drop a leave a response whenever I appreciate a article on a site
    or I have something to contribute to the discussion. It is a result of the passion
    communicated in the post I looked at. And after this post LEO Progress:
    J-2X to Test Stand A1 | Liquid Rocket Engines
    (J-2X, RS-25, general). I was moved enough to post a comment 🙂 I actually do have
    a couple of questions for you if it’s allright. Could it be just me or do some of these responses come across like coming from brain dead individuals? 😛 And, if you are writing at additional online sites, I would like to follow anything new you have to post. Could you make a list every one of your public pages like your Facebook page, twitter feed, or linkedin profile?

    1. @gumtree: This is my only online presence. No facebook. No twitter. No linkedin. Sorry. But I will do my best to keep material coming.

  2. Hi there every one, here every person is sharing these kinds of know-how,
    therefore it’s pleasant to read this webpage, and I used to go to see this webpage every day.

  3. Write more, thats all I have to say. Literally,
    it seems as though you relied on the video
    to make your point. You definitely know what youre talking
    about, why waste your intelligence on just posting videos to your weblog when you could
    be giving us something informative to read?

    1. @brukoland: Please take a look through the archives. Over the last few years I’ve posted lots and lots of information, from historical stuff to physics derivations, across fifty-some articles. Hopefully you’ll be able to find some interesting and informative reading. Thank you.

  4. My partner and I absolutely love your blog and find nearly all of
    your post’s to be just what I’m looking for. Does
    one offer guest writers to write content in your case?
    I wouldn’t mind composing a post or elaborating on most of the subjects you write with regards to here.

    Again, awesome web site!

  5. @billige: I have had some input from various other folks around the office. I always try to provide appropriate attribution. And every now and then the notion of having someone else here at NASA contirbute a guest article has come up, but we’ve not yet followed through. However, given that this is a NASA public website, we need to be able to control and approve content.

Leave a Reply to ray ban sale Cancel reply

Your email address will not be published.