Five “Secrets” of Engine 2059

Earlier this month, another successful test firing of a Space Launch System (SLS) RS-25 engine was conducted at Stennis Space Center in Mississippi. Engine testing is a vital part of making sure SLS is ready for its first flight. How do the engines handle the higher thrust level they’ll need to produce for an SLS launch? Is the new engine controller computer ready for the task of a dynamic SLS launch? What happens when if you increase the pressure of the propellant flowing into the engine? SLS will produce more thrust at launch than any rocket NASA’s ever flown, and the power and stresses involved put a lot of demands on the engines. Testing gives us confidence that the upgrades we’re making to the engines have prepared them to meet those demands.

If you read about the test – and you are following us on Twitter, right? – you probably heard that the engine being used in this test was the first “flight” engine, both in the sense that it is an engine that has flown before, and is an engine that is already scheduled for flight on SLS. You may not have known that within the SLS program, each of the RS-25 engines for our first four flights is a distinct individual, with its own designation and history. Here are five other things you may not have known about the engine NASA and RS-25 prime contractor Aerojet Rocketdyne tested this month, engine 2059.

Engine 2059 during testing at Stennis Space Center on March 10
Engine 2059 roars to life during testing at Stennis Space Center.

1. Engine 2059 Is a “Hubble Hugger” – In 2009, the space shuttle made its final servicing mission to the Hubble Space Telescope, STS-125. Spaceflight fans excited by the mission called themselves “Hubble Huggers,” including STS-125 crew member John Grunsfeld, today the head of NASA’s Science Mission Directorate. Along with two other engines, 2059 powered space shuttle Atlantis into orbit for the successful Hubble servicing mission. In addition to its Hubble flight, engine 2059 also made four visits to the International Space Station, including the STS-130 mission that delivered the cupola from which station crew members can observe Earth below them.

Launch of Atlantis on STS-125
The engine farthest to the left in this picture of the launch of the last Hubble servicing mission? That’s 2059. (Click for a larger version.)

2. The Last Shall Be First, and the Second-to-Last Shall Be Second-To-First – The first flight of SLS will include an engine that flew on STS-135, the final flight of the space shuttle, in 2011. So if the first flight of SLS includes an engine that flew on the last flight of shuttle, it only makes sense that on the second flight of SLS, there will be an engine that flew on the second-to-last flight of shuttle, right? Engine 2059 last flew on STS-134, the penultimate shuttle flight, in May 2011, and will next fly on SLS Exploration Mission-2.

View of the test stand during the test of engine 2059 at Stennis Space Center on March 10.
The test of engine 2059 at Stennis Space Center on March 10.

3. Engine 2059 Is Reaching for New Heights – As an engine that flew on a Hubble servicing mission, engine 2059 has already been higher than the average flight of an RS-25. Hubble orbits Earth at an altitude of about 350 miles, more than 100 miles higher than the average orbit of the International Space Station. But on its next flight, 2059 will fly almost three times higher than that – the EM-2 core stage and engines will reach a peak altitude of almost 1,000 miles!

Infographic about engine testing
Click to see larger version.

4. Sometimes the Engine Tests the Test Stand – The test of engine 2059 gave the SLS program valuable information about the engine, but it also provided unique information about the test stand. Because 2059 is a flown engine, we have data about its past testing performance. Prior to the first SLS RS-25 engine test series last year, the A1 test stand at Stennis had gone through modifications. Comparing the data from 2059’s previous testing with the test this month provides calibration data for the test stand.

NASA Social attendees with engine 2059 in the background
Attendees of a NASA Social visiting Stennis Space Center being photobombed by engine 2059.

5. You – Yes, You – Can Meet Awesome SLS Hardware Like Engine 2059 – In 2014, participants in a NASA Social at Stennis Space Center and Michoud Assembly Facility, outside of New Orleans, got to tour the engine facility at Stennis, and had the opportunity to have their picture made with one of the enginesnone other than 2059. NASA Social participants have seen other SLS hardware, toured the booster fabrication facility at Kennedy Space Center in Florida, and watched an RS-25 engine test at Stennis and a solid rocket booster test at Orbital ATK in Utah. Watch for your next opportunity to be part of a NASA Social here.

Watch the test here:
https://www.youtube.com/watch?v=https://www.youtube.com/watch?v=njb9Z2jX2fA[/embedyt]

If you do not see the video above, please make sure the URL at the top of the page reads http, not https.


Next Time: We’ve Got Chemistry!

Join in the conversation: Visit our Facebook page to comment on the post about this blog. We’d love to hear your feedback!

A Model Employee

This week, I’d like to introduce guest blogger Jared Austin, a fellow writer on the SLS Strategic Communications team, for a peek into a part of the SLS team that is rarely seen, but creates some of our most-seen tools. — David

Parts of SLS models during assembly
Ever wonder what the sides of the new SLS booster design look like? Now you know!

Few people know Barry Howell and what he’s done for the space program for decades. Neither astronaut nor engineer, through his work as a master model maker Barry has helped NASA visualize spacecraft before they existed.

For more than 40 years, Barry’s “office” has been a space model workshop filled with the past, present and futures of NASA. Barry has created models of many of NASA’s greatest endeavors – from the mighty Saturn 1B and Saturn V, to the iconic Space Shuttle, to early concepts of the International Space Station, to the Hubble Space Telescope, and many other vehicles. Those models aren’t the mass produced, off-the-shelf toys that little Timmy or Sarah receives for their eighth birthdays. Barry’s models are works of both artistic and technical mastery that are painstakingly crafted to scale in a variety of sizes from models that will fit on your desk to a giant that is over 12 feet tall.

Barry Howell with a freshly updated 1-to-50 scale model of SLS
Barry Howell with a freshly updated 1-to-50 scale model of SLS.

You don’t last forty years at a job unless you’re extremely passionate about what you do. Barry’s craft is a rare calling – there are only a small handful of modellers at Marshall Space Flight Center, and only a few NASA centers have model shops. Model makers who get a job like this tend to keep it for a long time, so turnover is low and opportunities are infrequent. Barry came to the job from a background in machining, which he started working while in high school. But when there is an opening in the model shop, there really is only one job qualification – be the best at what you do. There’s no particular education or experience requirement, unmatched skill is the determining factor.

Over the course of his career, Barry’s work has helped solve the agency’s most challenging problems, letting engineers visualize the hardware they are designing and building, and to prove concepts such as the shade on Skylab. After Skylab’s launch, NASA had only 10 days to design and build a sunshade for the space station. Barry helped build a model to demonstrate that the umbrella-like shade that Marshall engineers were designing would properly shield Skylab from the sun’s heat. And his work is rather unique within NASA.

Now Barry is taking his decades of experience in modeling all types of NASA systems and using it to produce models of America’s next great rocket, the Space Launch System.

A row of Saturn-era models in the model shop archive
In decades past, Barry created his models directly from vehicle engineering blueprints.

During his tenure in the model shop, Barry has seen changes in technology and process, along with classic methods that have stood the test of time. In the old days of Saturn and early Shuttle, each and every model would be carefully machined according to actual blueprints that allowed Barry to ensure they were precise representations of the real rockets. Working with aluminum or plexiglass blocks, Barry would carefully drill into blocks with a mill or strip away pieces with a lathe, using nothing more than his focused eye, steady hands, and well-honed judgment to carve the individual parts of the rocket from those blocks.

Today, for SLS, model production is a combination of old and new techniques. There’s no longer a need to individually handcraft each model that’s produced; resin casting allows for mass production of models, allowing the model shop to churn out the models at a faster rate and lower cost. But in order to produce the mold for that casting, the old ways are still best. To this day, Barry produces his initial master for each model line with the meticulous same mill and lathe machining process that he used during Saturn.

Close-up of parts for SLS models
In order to capture the fine detail of an official Marshall model, Barry machines the prototype for each model series the shop produces.

Recently, though, even more modern techniques have entered the model shop in the form of 3D printing, creating small astronaut figures, handheld models of the rocket, or small versions of the SLS engines. It’s a new area that the modelers have just begun to explore and holds many possibilities for improving the way they make SLS models going forward.

“I truly love every part of the model-making process, as well as the variety of different models that I’ve gotten the chance to make at NASA,” Barry said. “And the young guys I get to work with, they come up with a lot of great ideas on how to make things even better.

Barry has also been very gracious in passing on his knowledge to others. Modelers who create their own models at home will often request Barry’s inputs to help them make custom-made parts that look more realistic.

Now, as Barry rides off into the sunset of retirement in a couple of months, he’ll be leaving behind a legacy of models showing NASA’s greatest technological achievements. Barry has helped tell the exploration story and by capturing NASA history in 3D for decades.

Close-up of parts for SLS models
In addition to providing a way to share the vehicles NASA is building, Barry’s models have allowed engineers to visualize concepts that have been proposed.

Next Time: A Model Worker

Join in the conversation: Visit our Facebook page to comment on the post about this blog. We’d love to hear your feedback!