The mission management team has polled “go” to proceed with the terminal count sequence. The launch director is also “go” and teams have set a new target launch time of 1:47 a.m. EST and the countdown clock resumed at 1:37 a.m.
With approval from the launch director and managers, a series of countdown milestones for the Artemis I terminal count to launch will be initiated by the Ground Launch Sequencer at T-10 minutes:
- Ground Launch Sequencer (GLS) initiates terminal count (T-10M)
- GLS go for core stage tank pressurization (T-6M)
- Orion ascent pyros are armed (T-6M)
- Orion set to internal power (T-6M)
- Core Stage LH2 terminate replenish (T-5M57S)
- GLS is go for flight termination system (FTS) arm (T-5M)
- GLS is go for LH2 high flow bleed check (T-4M40S)
- GLS is go for core stage auxiliary power unit (APU) start (T-4M)
- Core Stage auxiliary power unit starts (T-4M)
- Core stage L0X terminate replenish (T-4M)
- ICPS LOX terminate replenish (T-3M30S)
- GLS is go for purge sequence 4 (T-3M10S)
- ICPS switches to internal battery power (T-1M56S)
- Core stage switches to internal power (T-1M30S)
- ICPS enters terminal countdown mode (T-1M20S)
- ICPS LH2 terminate replenish (T-50S)
- GLS sends “Go for automated launch sequencer” command (T-33S)
- Core stage flight computer to automated launching sequencer (T-30S)
- Hydrogen burn off igniters initiated (T-12S)
- GLS sends the command for core stage engine start (T-10S)
- RS-25 engines startup (T-6.36S)
Liftoff (T-0)
- Solid rocket booster separation (Mission Elapsed Time 00:02:12)
- Service module fairing jettison (MET 00:03:11)
- Launch abort system jettison (MET 00:03:16)
- Core stage main engine cutoff commanded (MET 00:08:03)
- Core stage/ICPS separation (MET 00:08:15)
- Orion solar array wing deploy begins (MET 00:18:09) – approx. 12 min duration
- Perigee raise maneuver (MET 00:52:56)
- Trans-lunar injection (MET 01:29:27)
- Orion/ICPS separation (MET 01:57:36)
The timing of events after liftoff may vary by a few seconds.