Author: NASA

Artemis I Networks for Communication and Navigation

Artemis I will demonstrate NASA’s networks’ comprehensive services for journeys to lunar orbit. The mission requires all three of NASA’s major networks to work in tandem, providing different communications and tracking service levels as Orion leaves Earth, orbits the Moon, and returns safely home.

Communications services allow flight controllers in mission control centers to send commands to the spacecraft and receive data from Orion and SLS systems. Tracking, or navigation, services enable the flight controllers to see where the spacecraft are along their trajectory through space.

>> Read  more

SLS Core Stage Passes Simulated Countdown Test

Engineers at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, completed a simulated launch countdown sequence on Oct. 5 for the sixth test of the eight-part core stage Green Run test series for NASA’s Space Launch System (SLS) rocket.

The rocket’s core stage has three flight computers and avionics systems to help launch and guide NASA’s Artemis missions to the Moon. During the simulated countdown, NASA engineers and technicians, along with prime contractors Boeing, and Aerojet Rocketdyne, monitored the stage to validate the timeline and sequence of events leading up to the test, which is similar to the countdown for the Artemis I launch.

The countdown sequence for an actual Artemis launch begins roughly two days prior to liftoff. In addition to all the procedures leading up to the ignition of the four RS-25 engines, the SLS core stage requires about six hours to fully load fuel into the two liquid propellant tanks. The simulated countdown sequence test at Stennis began at the 48-hour mark as if the stage was first powered up before liftoff. Engineers then skipped ahead in the sequence to monitor the stage and procedures of the stage 10 minutes before the hot fire. The simulated countdown sequence is one of the final tests of the SLS Green Run campaign. The series of tests is designed to gradually bring the rocket stage and all its systems to life for the first time.

Artemis I Rocket and Spacecraft Receive “Worm” Welcome

NASA worm and ESA logo on Orion spacecraft

NASA is headed back to the Moon as part of the Artemis program – and the agency’s “worm” logo will be along for the ride on the first integrated mission of the powerful Space Launch System (SLS) rocket and Orion spacecraft. Teams at NASA’s Kennedy Space Center in Florida have applied the historic logo in bright red on visible parts of the Artemis I rocket and spacecraft.

>> Read more

Artemis Plan to Land First Woman, Next Man on Moon in 2024

Following a series of critical contract awards and hardware milestones, an update on NASA’s Artemis program is now available, including the latest Phase 1 plans to land the first woman and the next man on the surface of the Moon in 2024.

In the 18 months since NASA accepted a bold challenge to accelerate its exploration plans by more than four years and establish sustainable exploration by the end of the decade, the agency has continued to gain momentum toward sending humans to the Moon again for the first time since the last Apollo mission in 1972.

The document captures Artemis progress to date, identifying the key science, technology and human missions as well as the commercial and international partnerships that will ensure we continue to lead in exploration and achieve our ambitious goal to land astronauts on the Moon.

>>Download and read the Artemis Plan

Artemis I Preparations Stack Up

Technicians with NASA’s Exploration Ground Systems rehearse booster stacking operations inside the Vehicle Assembly Building (VAB) at the agency’s Kennedy Space Center in Florida on Monday, Sept.14, in preparation for the Artemis I launch. The team is using full-scale replicas of booster segments, referred to as pathfinders, for the practice exercise in one of the tallest sections, or high bays, of the VAB built for stacking rockets. As part of the rehearsal, a pathfinder for an aft segment, the very bottom of the stack, was prepared in High Bay 4. Then, a team of crane operators moved the segment into High Bay 3, where it was placed on the mobile launcher. Careful measurements were taken before the team added a center segment to the stack.

The actual Space Launch System (SLS) booster segments will be stacked on the mobile launcher later this year, following completion of Green Run testing of the rocket’s core stage – a series of eight tests taking place at the agency’s Stennis Space Center in Mississippi.

NASA Completes Fifth Green Run Test for First Artemis Moon Rocket

Engineers have completed the fifth of eight Green Run tests on the core stage of NASA’s new Space Launch System (SLS) rocket, continuing progress toward a hot fire test this fall. Operators evaluated the stage’s thrust vector control system on the historic B-2 Test Stand at NASA’s Stennis Space Center near Bay St. Louis, Miss., on Sept. 13. The test provided critical verification of the control system and its related hydraulics as operators moved the stage’s four RS-25 engines as they must move during flight to steer the rocket and maintain a proper trajectory. The stage now is set for two more tests – a simulated countdown demonstration and wet dress rehearsal – directly leading to the hot fire of all four RS-25 engines, as during an actual flight.

In the countdown demonstration, engineers will simulate the launch countdown and procedures to validate the established timeline and sequence of events. In the wet dress rehearsal, engineers will conduct another countdown exercise and actually load, control and drain more than 700,000 gallons of cryogenic propellants to ensure all is set for the final test of the Green Run series. The concluding test will activate all stage systems and fire the four RS-25 engines to generate the same combined 1.6 million pounds of thrust that will help launch the SLS rocket when it flies on the Artemis I mission.

SLS Booster Test Update: Successful Test Completed!

Teams from NASA’s Space Launch System (SLS) and prime contractor Northrop Grumman successfully completed the Flight Support Booster-1 (FSB-1)  ground test at Northrop Grumman’s test facility in Promontory, Utah. Watch a replay of the test on NASA Television or NASA’s YouTube channel. Learn more about the test at https://www.nasa.gov/media/flight-support-booster-test.html

SLS Booster Test Update: Final Systems Checks

Final systems checks for NASA’s Space Launch Systems (SLS) Flight Support Booster-1 (FSB-1) test are complete and the test conductor has given the ground test a “go.” The test fire is scheduled to begin at 1:05 MDT, 3:05 p.m. EDT. Watch the FSB-1 test live on NASA Television or the agency’s website.

SLS Booster Test Update: Scheduled Hold of Countdown

NASA’s Space Launch System (SLS) Flight Support Booster-1 (FSB-1) test is in a scheduled hold of the countdown. The hold allows time for remaining personnel to evacuate the test area to their designated locations. The test team will also check motor temperatures and confirm data acquisition systems are ready to record. The test fire is scheduled for 1:05 MDT 3:05 p.m. EDT.

SLS Booster Test Update: NASA TV Coverage Underway

Live coverage of NASA’s Space Launch System (SLS) Flight Support Booster-1 (FSB-1) ground test has begun on NASA Television and the agency’s website. The test fire is scheduled to begin at 3:05 EDT. Systems checks are underway for the full-scale, five-segment solid rocket booster ground test at Northrop Grumman’s test facility on Promontory, Utah. This is the first in a series of tests that are examining motor performance for potential new materials and processes that may be incorporated in the booster after the Artemis III lunar mission.