Stacking is complete for the twin Space Launch System (SLS) solid rocket boosters for NASA’s Artemis I mission. Over several weeks, workers used one of five massive cranes to place 10 booster segments and nose assemblies on the mobile launcher inside the Vehicle Assembly Building (VAB) at NASA’s Kennedy Space Center in Florida. Engineers with Exploration Ground Systems placed the first segment on Nov. 21, 2020, and continued the process until the final nose assembly was placed on March 2.
Prior to the arrival of the core stage, the team will finish installing electrical instrumentation and pyrotechnics, then test the systems on the boosters. When the SLS core stage arrives at Kennedy, technicians will transport it to the VAB and then stack it on the mobile launcher between the two boosters.
The SLS will be the most powerful rocket in the world, producing up to 8.8 million pounds of thrust during its Artemis I launch.
“Seeing the Space Launch System solid rocket boosters stacked completely on the Mobile Launcher for the first time makes me proud of the entire team especially the Exploration Ground Systems crew at Kennedy who are assembling them and also the teams at Marshall and Northrop Grumman who designed, tested and built them,” said Bruce Tiller, the SLS boosters manager at NASA’s Marshall Space Flight Center. “This team has created the tallest, most powerful boosters ever built for flight, boosters that will help launch the Artemis I mission to the Moon.”
Artemis I will be an uncrewed test of the Orion spacecraft and SLS rocket as an integrated system ahead of crewed flights to the Moon. Under the Artemis program, NASA aims to land the first woman and the next man on the Moon and establish sustainable lunar exploration.
NASA’s Space Launch System (SLS) solid rocket boosters have grown taller with the addition of the fifth and final pair of motor segments in preparation for the launch of Artemis I later this year. At NASA’s Kennedy Space Center in Florida, engineers with Exploration Ground Systems lowered the final solid rocket booster into place on the mobile launcher on Feb. 23. Up next, the nose assemblies will be placed atop the segments to complete the boosters. The twin boosters will power the first flight of the agency’s new deep space rocket during the launch of Artemis I. This mission is an uncrewed flight to test the SLS rocket and Orion spacecraft as an integrated system, preparing the way for Artemis II and other crewed flights to the Moon.
NASA and Space Launch System (SLS) core stage prime contractor Boeing are thoroughly examining a liquid oxygen valve inside the stage’s engine section in order to identify repairs needed before a second hot fire with the Artemis I stage.
During preparations for the second hot fire, data indicated the valve was not opening correctly. Technicians installed platforms that allow engineers to access the valve inside the core stage engine section while the stage remains in the B-2 stand at NASA’s Stennis Space Center near Bay St. Louis, Mississippi. After completion of troubleshooting, which will continue over the weekend, NASA will be in a better position to identify a potential date for the second hot fire test.
This valve, called a pre-valve, must be fully operational during hot fire testing. The valve is part of the core stage main propulsion system, and it helps deliver liquid oxygen propellant flowing from the liquid oxygen tank to an RS-25 engine. For the first hot fire on Jan. 16, all four liquid oxygen pre-valves performed as expected as did all four liquid hydrogen pre-valves.
The Green Run is a comprehensive series of tests for the SLS core stage before it launches the Artemis missions to the Moon, and the hot fire is the final and most intensive test. The Green Run tests have provided invaluable information on how the new rocket stage operates before it is used to launch the Artemis I mission.
NASA’s Artemis IOrion spacecraft is being outfitted with additional artwork as technicians began installing the logo for ESA (European Space Agency). ESA provided the European-built service module, which provides power and propulsion for the Orion spacecraft, and will also provide water and air for astronauts on future missions.
Artemis I extends NASA and ESA’s strong international partnership beyond low-Earth orbit to lunar exploration with Orion on Artemis missions. The ESA logo joins the historic NASA “meatball” insignia on the Artemis I spacecraft adapter jettison fairing panels that protect the service module during launch.
Orion is currently stationed at NASA’s Kennedy Space Center in the Multi-Payload Processing Facility, where it will undergo fueling and servicing by NASA’s Exploration Ground Systems and Jacobs Technology teams in preparation for the upcoming flight test with the Space Launch System rocket under the agency’s Artemis program.
Booster stacking continues! The second to last set of segments for NASA’s Space Launch System (SLS) solid rocket boosters were placed on the mobile launcher inside the Vehicle Assembly Building at NASA’s Kennedy Space Center. Engineers with Exploration Ground Systems and Jacobs transported the segments from the Rotation, Processing and Surge Facility, where they have been since June. Once fully stacked, each booster will stand nearly 17 stories tall. The twin boosters will power the first flight of the agency’s new deep space rocket during the Artemis I mission. This uncrewed flight later this year will test the SLS rocket and Orion spacecraft as an integrated system ahead of crewed flights.
The twin boosters will power the first flight of the agency’s new deep space rocket on its first Artemis Program mission. Artemis I will be an uncrewed flight to test the SLS rocket and Orion spacecraft as an integrated system ahead of crewed flights.
Booster stacking for NASA’s Space Launch System (SLS) rocket is continuing at NASA’s Kennedy Space Center. The second of five segments for the SLS rocket boosters have been placed on the mobile launcher in preparation for the launch of Artemis I later this year. This marks four out of 10 solid rocket booster segments being lifted via crane and placed on the launcher, the structure used to process, assemble, and launch SLS. The twin boosters will power the first flight of SLS, the agency’s new deep space rocket for Artemis I. This uncrewed flight will test the SLS and Orion spacecraft as an integrated system ahead of crewed flights to the Moon as part of the Artemis program.