Tag: Test

NASA Installs High Gain Antenna for Mission to Study Icy Moon of Jupiter

Image of a high-gain antenna that will be attached to NASA's Europa Clipper, a spacecraft to study Jupiter's icy moon.
Technicians prepare to install the nearly 10 feet (3 meters) wide dish-shaped high-gain antenna to NASA’s Europa Clipper, a spacecraft to study Jupiter’s icy moon, at the agency’s Payload Hazardous Servicing Facility at Kennedy Space Center in Florida on Monday, June 17, 2024. Photo credit: NASA/Kim Shiflett

When NASA’s Europa Clipper is in orbit around Jupiter, transmitting science data and receiving commands from Earth across hundreds of millions of miles, it will need a powerful antenna. Technicians installed the spacecraft’s high-gain antenna inside the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center in Florida on June 17.

Scheduled to launch later this year, Europa Clipper will embark on a 1.8-billion-mile (2.6-billion-kilometer) journey to Jupiter. It is the largest spacecraft NASA has developed for a planetary mission. Set to arrive in April 2030, it will study the gas giant’s icy moon, Europa, to determine its potential to support life.

The spacecraft will conduct approximately 50 flybys of Europa, allowing its nine science instruments to gather data on the moon’s atmosphere, its ice crust, and the ocean underneath. The nearly 10-feet-wide (3-meter) dish-shaped antenna and several smaller antennas will transmit the data to Earth, a trip that will take about 45 minutes when the spacecraft is in orbit around Jupiter.

Image of high-gain antenna which will be attached to NASA's Europa Clipper, a spacecraft to study Jupiter's icy moon.
Technicians prepare to install the high-gain antenna to NASA’s Europa Clipper, a spacecraft to study Jupiter’s icy moon, at the agency’s Payload Hazardous Servicing Facility at Kennedy Space Center in Florida on Monday, June 17, 2024. Photo credit: NASA/Kim Shiflett

To ensure Europa Clipper has the necessary bandwidth, the antenna will operate on NASA’s deep space X-band radio frequencies of 7.2 and 8.4 (GHz), and Ka-band at 32 (GHz), through the agency’s Deep Space Network, a global array of large radio antennas that communicate with dozens of spacecraft throughout the solar system.

Europa Clipper underscores NASA’s commitment to exploring our solar system for habitable conditions beyond Earth. Although Europa Clipper is not a life-detection mission, understanding Europa’s habitability will help us better understand how life developed on Earth and whether we’re likely to find conditions that might support life beyond our planet.

Technicians at NASA Kennedy will continue to prepare the spacecraft for its mission and perform final checkouts as part of launch preparations. Europa Clipper is scheduled to launch atop a SpaceX Falcon Heavy rocket from Kennedy’s Launch Complex 39A, no earlier than October 2024.

Europa Clipper’s high-gain antenna was designed by the Johns Hopkins University APL (Applied Physics Laboratory) in Laurel, Maryland, and aerospace vendor AASC (Applied Aerospace Structures Corporation) in Stockton, California.

Managed by Caltech in Pasadena, California, NASA’s Jet Propulsion Laboratory leads the development of the Europa Clipper mission in partnership with APL for NASA’s Science Mission Directorate in Washington. The main spacecraft body was designed by APL in collaboration with JPL and NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The Planetary Missions Program Office at NASA’s Marshall Space Flight Center in Huntsville, Alabama, executes program management of the Europa Clipper mission.

NASA’s Launch Services Program, based at Kennedy, manages the launch service for the Europa Clipper spacecraft.

NASA’s Europa Clipper Mission Advances with Solar Array Deployment

Three people in jumpsuits stand in front of a stretched out five-panel solar array inside of a building.
Technicians examine the first of two fully extended five-panel solar arrays built for NASA’s Europa Clipper suspended on a support system called a gravity offload fixture during inspection and cleaning as part of assembly, test, and launch operations inside the Payload Hazardous Servicing Facility at the agency’s Kennedy Space Center in Florida on Wednesday, March 6, 2024. Photo credit: NASA/Ben Smegelsky

Processing of the large solar arrays built for NASA’s Europa Clipper is now underway inside the Payload Hazardous Servicing Facility at the agency’s Kennedy Space Center in Florida. 

Planned to arrive at Jupiter in April 2030, the spacecraft will study Jupiter’s moon Europa, which shows strong evidence beneath its icy crust of a global ocean over twice the volume of all Earth’s oceans. Europa is currently considered one of the most promising habitable environments in our solar system.

The first of two five-panel solar arrays built for NASA’s Europa Clipper stands inside the Payload Hazardous Servicing Facility at the agency’s Kennedy Space Center in Florida in preparation for inspection and cleaning as part of assembly, test, and launch operations on Wednesday, March 6, 2024. Photo credit: NASA/Ben Smegelsky

Once processing of the first five-panel solar array is complete, technicians will remove it from the gravity offload fixture, which helps support the weight of the array. The same steps will then be repeated with the second solar array. Built by Airbus in Leiden, Netherlands, the arrays arrived at Kennedy late last month by truck, after travelling to the U.S. by air. 

When both solar arrays are installed and deployed on Europa Clipper – the agency’s largest spacecraft ever developed for a planetary mission – the spacecraft will span a total length of more than 100 feet and weigh 7,145 pounds without the inclusion of propellants. The spacecraft needs the large solar arrays to collect enough light to power it as it operates in the Jupiter system, which is more than five times as far from the Sun as Earth. 

Europa Clipper is being assembled at NASA’s Jet Propulsion Laboratory in Southern California and is managed in partnership with Johns Hopkins University Applied Physics Laboratory in Laurel, Maryland. The spacecraft will ship to Florida later this year for launch aboard a SpaceX Falcon Heavy rocket from Kennedy’s Launch Complex 39A. NASA’s Launch Services Program, based at Kennedy, is managing the launch service.  

Join the conversation and get Europa Clipper mission updates from these accounts: 

X: @EuropaClipper, @NASA, @NASAJPL, @NASA_LSP, @NASASolarSystem, @NASAKennedy 

Facebook: NASA’s Europa Clipper Mission, NASA, NASA Jet Propulsion Laboratory, NASA’s Launch Services Program, NASA Solar System Exploration, NASA’s Kennedy Space Center 

Instagram: @NASA, @NASAJPL, @NASASolarSystem, @NASAKennedy