NASA’s LOFTID Technology Demonstration Begins

United Launch Alliance’s Centaur upper stage has successfully powered on the LOFTID re-entry vehicle, kicking off the LOFTID mission sequence. About two minutes after power on, Centaur released the payload adapter that had connected JPSS-2 to the rocket’s upper stage.

Limited data will be received real-time during the technology demonstration. Other milestones are notional given the mission timeline and sequence.

NASA’s LOFTID: A New Kind of Heat Shield

Illustration of Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID).
Illustration of Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID). Credit: NASA

NASA’s Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID), dedicated to the memory of Bernard Kutter – a manager of advanced programs at United Launch Alliance (ULA) who championed lower-cost access to space and technologies to make that a reality – is a partnership between NASA’s Space Technology Mission Directorate and ULA to demonstrate an inflatable aerodynamic decelerator, or aeroshell, technology that could one day help land humans on Mars.

Since NASA’s inception in 1958, the agency has relied heavily on rigid aeroshells (a protective shell composed of a heat shield and a back shell), parachutes, and retro-propulsion (rockets) to decelerate people, vehicles, and hardware during orbital entry, descent, and landing operations. The LOFTID demonstration is poised to revolutionize the way NASA and industry deliver payloads to planetary destinations with atmospheres.

After more than a decade of development of Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology, including two suborbital flight tests, the LOFTID orbital flight test is the next step. This return from orbit demonstration provides an entry environment relevant to many potential applications, paving the way for its use on future missions. The LOFTID re-entry vehicle, at 19.7 feet (6 meters) diameter, will be the largest blunt body aeroshell to ever go through atmospheric entry.

When a spacecraft enters an atmosphere, aerodynamic forces – like drag – act upon it, slowing it down and converting its kinetic energy into heat. Using atmospheric drag typically is the most mass-efficient method to slow down a spacecraft. Since HIAD technology is larger than traditional aeroshells, it creates more drag and starts the deceleration process in the upper reaches of the atmosphere, allowing not only heavier payloads, but also landing at higher altitudes. It could additionally be used to bring an unprecedented amount of mass back from low-Earth orbit, including items from the International Space Station. Another significant potential benefit is enabling the recovery of rocket assets for reuse which can reduce the overall cost of access to space.

The HIAD design consists of an inflatable structure that maintains its shape against the drag forces, and a protective flexible thermal protection system that withstands the heat of reentry. The inflatable structure is constructed with a stack of pressurized concentric rings, or tori, that are strapped together to form an exceptionally strong blunt cone-shaped structure.

The rings are made from braided synthetic fibers that are, by weight, 10 times stronger than steel. A flexible thermal protection system insulates the rings from the searing heat of atmospheric entry; LOFTID can withstand temperatures in excess of 2900°F (1600°C). It’s constructed with three layers: an exterior ceramic fiber cloth layer to maintain integrity of the surface, a middle layer of insulators to inhibit heat transmission, and an interior layer that prevents hot gas from reaching the inflatable structure. The flexible thermal protection system is also foldable, packable, deployable, and tailorable. Because it is flexible, it takes up less room in the rocket and allows the design to be scalable.

LOFTID is managed by the agency’s Langley Research Center in Hampton, Virginia, with contributions from various NASA centers: Ames Research Center in Silicon Valley, California; Marshall Space Flight Center in Huntsville, Alabama; and Armstrong Flight Research Center in Edwards, California. NASA’s Launch Services Program, based at the agency’s Kennedy Space Center in Florida, managed today’s launch.

Signal Acquired

The team has received signal from the JPSS-2 satellite. NOAA’s newest satellite will support essential forecasts for extreme weather events, feed daily weather models and monitor climate change.

JPSS-2 Satellite Separates From Second Stage, Traveling on Its Own

The United Launch Alliance Centaur upper stage achieved the desired sun-synchronous, polar low-Earth orbit for National Oceanic and Atmospheric Administration’s (NOAA) Joint Polar Satellite System-2 satellite just over 28 minutes into flight.

Now in low-Earth orbit, the Centaur will perform a deorbit burn, jettison the primary payload adapter, and put Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) on a reentry trajectory enabling it to demonstrate the inflatable aeroshell’s ability to slow down and survive re-entry.

JPSS-2 is 100th Primary Mission for NASA’s Launch Services Program

Launch Services Program logoOn Oct. 1, 1998, NASA consolidated expendable launch vehicle services shared by Glenn Research Center in Cleveland, Ohio; Goddard Space Flight Center in Greenbelt, Maryland; and Kennedy Space Center in Florida, and created the Expendable Launch Vehicle Program, renamed Launch Services Program in 2000 and based out of Kennedy. On Oct. 24, 1998, Deep Space I launched on a Delta II rocket from Space Launch Complex-17 at Cape Canaveral Air Force Station in Florida, followed by 99 more primary missions for the program over the past 34 years.

Today’s successful launch of the National Oceanic and Atmospheric Administration’s Joint Polar Satellite System-2 (JPSS-2) and NASA’s Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) technology demonstration marks the program’s 100th primary mission and joins a legacy that includes historic missions such as Pluto New Horizons, the Parker Solar Probe, the Mars rovers, DART, and scores of Earth satellites and science probes.

BECO Complete, Second-Stage Burn in Progress

A United launch Alliance Atlas V 401 rocket soars upward after liftoff from Space Launch Complex 3 at Vandenberg Space Force Base in California on Nov. 10, carrying the National Oceanic and Atmospheric Administration’s (NOAA) Joint Polar Satellite System-2 (JPSS-2) and NASA’s Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) technology demonstration. Launch was at 1:49 a.m. PST.
A United launch Alliance Atlas V 401 rocket soars upward after liftoff from Space Launch Complex 3 at Vandenberg Space Force Base in California on Nov. 10, carrying the National Oceanic and Atmospheric Administration’s (NOAA) Joint Polar Satellite System-2 (JPSS-2) and NASA’s Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) technology demonstration. Launch was at 1:49 a.m. PST. Photo credit: NASA/Randy Beaudoin

Booster engine cutoff occurred on time, the first and second stages separated as planned, and the Centaur second stage main engine has started its burn. The payload fairing that protected the JPSS-2 satellite during the first minutes of ascent has jettisoned as expected. The second stage main engine will burn for just over 12 minutes, taking the spacecraft towards the Equator and to low-Earth orbit.

Atlas V Rocket Reaches Mach I, Followed by Max-Q

The Moon makes a stunning backdrop for the launch of the third in a series of polar-orbiting weather satellites for the National Oceanic and Atmospheric Administration (NOAA) and our Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) on Nov. 10 at 1:49 a.m. PST from Vandenberg Space Force Base in California.
The Moon makes a stunning backdrop for the launch of the third in a series of polar-orbiting weather satellites for the National Oceanic and Atmospheric Administration (NOAA) and our Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) on Nov. 10 at 1:49 a.m. PST from Vandenberg Space Force Base in California. Photo credit: United Launch Alliance

The United Launch Alliance Atlas V 401 rocket exceeded the speed of sound around a minute into flight, and soon thereafter reached Max-Q – the moment of maximum dynamic pressure on the rocket. Next up is booster engine cutoff, followed by separation of the first and second stages of the rocket.

JPSS-2 and LOFTID Launch!

The Moon makes a stunning backdrop for the successful launch of the third in a series of polar-orbiting weather satellites for the National Oceanic and Atmospheric Administration (NOAA) and our Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) on Nov. 10 at 1:49 a.m. PST from Vandenberg Space Force Base in California.
A United Launch Alliance (ULA) Atlas V rocket carrying the Joint Polar Satellite System (JPSS)-2 civilian polar-orbiting weather satellite for the National Oceanic and Atmospheric Administration (NOAA) and NASA’s Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) tech demo lifts off from Space Launch Complex-3 at Vandenberg Space Force Base in California at 1:49 a.m. PST Nov. 10, 2022.

National Oceanic and Atmospheric Administration’s (NOAA) Joint Polar Satellite System-2 (JPSS-2) satellite, with NASA’s Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) technology demonstration along for the ride, lifted off from Space Launch Complex-3 at Vandenberg Space Force Base in California this morning, Nov. 10! Powered by 860,000 pounds of thrust from the United Launch Alliance Atlas V 401 rocket’s RD-180 engine, launch occurred at 1:49 a.m. PST.

Launch Director – ‘Go’ For Launch

The National Oceanic and Atmospheric Administration’s (NOAA) Joint Polar Satellite System-2 (JPSS-2) satellite with NASA’s Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) as a secondary payload, stand ready to lift off atop a United Launch Alliance (ULA) Atlas V rocket from Space Launch Complex-3 at Vandenberg Space Force Base in California on Nov. 10.
The National Oceanic and Atmospheric Administration’s (NOAA) Joint Polar Satellite System-2 (JPSS-2) satellite with NASA’s Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) as a secondary payload, stand ready to lift off atop a United Launch Alliance (ULA) Atlas V rocket from Space Launch Complex-3 at Vandenberg Space Force Base in California on Nov. 10. Photo credit: NASA

The launch director has just given the National Oceanic and Atmospheric Administration’s (NOAA) Joint Polar Satellite System-2 (JPSS-2) satellite mission a ‘go’ for launch! Mission and launch managers are counting down to the launch of the United Launch Alliance (ULA) Atlas V 401 rocket from Space Launch Complex-3 at Vandenberg Space Force Base in California. Launch is scheduled less than five minutes from now.

JPSS-2, and NASA’s Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) which is hitching a ride, should reach the desired orbit just over 28 minutes into flight. A single burn of ULA’s Centaur upper stage will place JPSS-2 into a sun-synchronous, polar low-Earth orbit for deployment. Two subsequent burns by Centaur will lower the altitude and put LOFTID on a re-entry trajectory.

This will be the 41st flight of the Atlas V 401 rocket, the most flown of all the configurations. This rocket, designated AV-098, features a four-meter-diameter Extended Payload Fairing (EPF), no solid rocket boosters and a single RL10C-1 engine on the Centaur. The JPSS-2 launch will be the 301st and final Atlas mission from Vandenberg dating back to 1959, as ULA transitions to its Vulcan rocket.

JPSS-2 is currently the last mission contracted by NASA’s Launch Services Program, based at the agency’s Kennedy Space Center in Florida, to fly on the venerable Atlas V and marks the 100th primary mission for the program since 1998.

Coming Up: Liftoff of the JPSS-2 Satellite Mission, LOFTID Tech Demo

The Mobile Service Tower rolls back from the United Launch Alliance (ULA) Atlas V rocket carrying the Joint Polar Satellite System (JPSS)-2 civilian polar-orbiting weather satellite for the National Oceanic and Atmospheric Administration (NOAA) and NASA's Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) from Space Launch Complex-3 at Vandenberg Space Force Base, California.
The Mobile Service Tower rolls back from the United Launch Alliance (ULA) Atlas V 401 rocket carrying the Joint Polar Satellite System (JPSS)-2 polar-orbiting weather satellite for the National Oceanic and Atmospheric Administration (NOAA) and NASA’s Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) from Space Launch Complex-3 at Vandenberg Space Force Base, California. Photo credit: United Launch Alliance

In just under 10 minutes, from Space Launch Complex-3 at Vandenberg Space Force Base in California, the United Launch Alliance (ULA) Atlas V 401 rocket carrying National Oceanic and Atmospheric Administration’s (NOAA) Joint Polar Satellite System-2 (JPSS-2) satellite will rumble to life, sending it and NASA’s secondary payload, the Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) technology demonstration, on their missions. The fuel fill sequence has been initiated, and the rocket is being fueled with liquid oxygen (LO2) and rocket-grade kerosene (RP-1).

Prior to launch, originally targeted for 1:25 a.m. PST and moved to 1:49 a.m. PST, several sequences will be performed to ensure launch success. The fuel fill sequence will be completed, water deluge system actuation pressure adjustment will be performed, the LO2 in the Atlas booster and Centaur second stage will reach flight levels, as well as the liquid hydrogen fuel levels in the Centaur. Final launch polls are conducted and after a “go” to continue countdown is given, the spacecraft transfers to internal power and an automatic computer sequencer takes control for all critical events through liftoff. Fuel tanks reach flight pressure, and the Atlas first stage and Centaur upper stage switch to internal power. The launch control system is enabled, and ‘go’ for launch is verified before entering terminal countdown.

JPSS-2 is the third satellite in the Joint Polar Satellite System series and is designed to scan the Earth as it orbits from the North to the South Pole, crossing the equator 14 times a day to provide full global coverage twice a day. Operating from about 512 miles above Earth, JPSS-2 is expected to capture data to improve weather forecasts, helping scientists predict and prepare for extreme weather events and climate change.

LOFTID is a technology demonstration of a cross-cutting inflatable aeroshell, or heat shield, designed for atmospheric re-entry. The mission is dedicated to the memory of Bernard Kutter, a manager of advanced programs at ULA who championed lower-cost access to space and technologies to make that a reality. The technology demonstrated by LOFTID could be used for crewed and large robotic missions to Mars.

NASA’s Launch Services Program, based at the agency’s Kennedy Space Center in Florida, is responsible for managing the launch service. LOFTID is managed by the agency’s Langley Research Center in Hampton, Virginia, with contributions from various NASA centers: Ames Research Center in Silicon Valley, California; Marshall Space Flight Center in Huntsville, Alabama; and Armstrong Flight Research Center in Edwards, California.

Stay connected with the mission on social media, and let people know you’re following it on Twitter, Facebook, and Instagram using the hashtags #JPSS2 and #LOFTID and tag these accounts:

Twitter: @NASA@NOAA@NOAASatellites@JPSSProgram@NASA_LSP@NASAKennedy@NASAEarth@NASAGoddard@NASALangley@NASA_Technology@ULALaunch
Facebook: NASANOAA SatellitesNASA LSPNASA KennedyNASA EarthNASA_LangleyNASA Technology
Instagram: NASANASA KennedyNOAA SatellitesNASAEarthNASA_Langley