Millions Tag Along for NASA’s Mars 2020 Mission

"Send Your Name to Mars" logo installation
The “Send Your Name to Mars” logo is installed on the Mars Perseverance rover on March 16, 2020, inside the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center in Florida. Photo credit: NASA/JPL

When the Mars Perseverance rover begins its seven-month journey to the Red Planet in mid-July, it will be carrying the names of more than 10 million people throughout the world.

Those names were etched onto three microchips, which were placed aboard Perseverance. On March 16, 2020, inside the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center in Florida, the “Names to Mars” logo was installed on the rover.

Those who took advantage of the special public promotion also had the opportunity to receive a souvenir boarding pass and obtain “frequent flyer points” as part of humanity’s first round trip to another planet. In total, 10,932,295 people submitted their names. Turkey (2,528,844), India (1,778,277) and the United States (1,733,559) all had more than 1 million submissions.

NASA's Mars Perseverance rover at Kennedy Space Center
More than 10 million names were etched onto three microchips, which were placed aboard Perseverance. Photo credit: NASA/JPL

Perseverance will search for signs of past microbial life, characterize the planet’s climate and geology, collect samples for future return to Earth, and pave the way for human exploration of the Red Planet.

The rover will land on the Red Planet on Feb. 18, 2021. Liftoff aboard a United Launch Alliance Atlas V 541 rocket is targeted for mid-July from Cape Canaveral Air Force Station. NASA’s Launch Services Program based at Kennedy is managing the launch.

Weighing more than 2,300 pounds, Perseverance is about the size of a car, with dimensions similar to the Curiosity rover. It was developed under NASA’s Mars Exploration Program.

Earlier this month at Kennedy, activities to measure mass properties of the Cruise Stage vehicle were performed on the spin table inside the Payload Hazardous Servicing Facility. Successful testing also was performed on NASA’s Mars Helicopter, which will be attached to Perseverance. The helicopter will be the first aircraft to fly on another planet.

Please visit the mission’s website for more information on the Mars 2020 mission.

NASA Shows Perseverance with Helicopter, Cruise Stage Testing

NASA’s Mars Helicopter and its cruise stage undergo functional testing in the airlock inside Kennedy Space Center’s Payload Hazardous Servicing Facility on March 10, 2020.
NASA’s Mars Helicopter and its cruise stage undergo functional testing in the airlock inside Kennedy Space Center’s Payload Hazardous Servicing Facility on March 10, 2020. Photo credit: NASA/Cory Huston

The Mars 2020 mission involving NASA’s newly named rover — Perseverance — received a significant boost following the completion of important testing at the agency’s Kennedy Space Center in Florida.

Activities to measure mass properties of the Cruise Stage vehicle were performed on the spin table inside the Payload Hazardous Servicing Facility. Successful testing also was performed on NASA’s Mars Helicopter, which will be attached to Perseverance. The functional test (50 RPM spin) was executed on the stand in the airlock. This marked the last time the rotor blades will be operated until the rover reaches the Martian surface.

The NASA Mars Helicopter will be the first aircraft to fly on another planet. The twin-rotor, solar-powered helicopter will remain encapsulated after landing, deploying once mission managers determine an acceptable area to conduct test flights.

NASA’s Mars Helicopter and its cruise stage undergo functional testing in the airlock inside Kennedy Space Center’s Payload Hazardous Servicing Facility on March 10, 2020.
The NASA Mars Helicopter will be the first aircraft to fly on another planet. Photo credit: NASA/Cory Huston

On March 5, 2020, NASA announced Perseverance as the new name for the ars 2020 rover. Alexander Mather, a seventh-grader from Virginia, provided the winning name for the rover with his entry in the agency’s Name the Rover essay contest.

Perseverance will land on the Red Planet on Feb. 18, 2021. Liftoff aboard a United Launch Alliance Atlas V 541 rocket is targeted for mid-July from Cape Canaveral Air Force Station. NASA’s Launch Services Program based at Kennedy is managing the launch.

About the size of a car with dimensions similar to the Curiosity rover, Perseverance was developed under NASA’s Mars Exploration Program. The mission aims to search for signs of past microbial life, characterize the planet’s climate and geology, collect samples for future return to Earth and pave the way for human exploration of Mars.

For more in-depth information, visit the mission’s website.

Mars 2020 Rover Undergoing Processing at Florida Spaceport

Mars 2020 rover at Kennedy Space Center
The launch of the Mars 2020 rover is targeted for mid-July. Photo credit: NASA/Kim Shiflett

Soon after its arrival to NASA’s Kennedy Space Center last week, the Mars 2020 rover was moved to the Florida spaceport’s Payload Hazardous Servicing Facility, where it has been undergoing processing for its mission later this year. The spacecraft was flown to Kennedy from California aboard a C-17 aircraft on Feb. 12.

Targeted for mid-July 2020, the mission will launch aboard a United Launch Alliance Atlas V 541 rocket from Cape Canaveral Air Force Station. The launch is managed by the Launch Services Program.

The Mars 2020 rover will search for signs of past microbial life, characterize the planet’s climate and geology, collect samples for future return to Earth and pave the way for human exploration of Mars.

Mars 2020 Rover Makes its Way to Kennedy

Mars 2020 rover arrival at Kennedy
The Mars 2020 rover is offloaded from a C-17 aircraft at the Launch and Landing Facility, formerly the Shuttle Landing Facility, at NASA’s Kennedy Space Center in Florida on Feb. 12, 2020. Photo credit: NASA/Cory Huston

Leaving from its temporary home at NASA’s Jet Propulsion Laboratory (JPL) in Pasadena, California, the Mars 2020 rover completed a cross-country trip Wednesday afternoon. It arrived on a C-17 aircraft to the Launch and Landing Facility (formerly the Shuttle Landing Facility) at NASA’s Kennedy Space Center in Florida.

Mars 2020 rover delivered to Kennedy Space Center
After its arrival at Kennedy from California, the Mars 2020 rover is prepared to be moved to the Florida spaceport’s Payload Hazardous Servicing Facility for unboxing. Photo credit: NASA/Cory Huston

The spacecraft was then moved to Kennedy’s Payload Hazardous Servicing Facility (PHSF), where it is being unboxed today. Before making the trek to the Florida spaceport, the Mars 2020 rover traveled about 70 miles southeast from JPL to March Air Reserve Base.

Carrying seven different scientific instruments, the Mars 2020 rover will land on the Red Planet on Feb. 18, 2021. Liftoff, aboard a United Launch Alliance Atlas V 541 rocket, is targeted for mid-July from Cape Canaveral Air Force Station. NASA’s Launch Services Program based at Kennedy is managing the launch.

About the size of a car with dimensions similar to the Curiosity rover, the Mars 2020 rover was developed under NASA’s Mars Exploration Program. The mission aims to search for signs of past microbial life, characterize the planet’s climate and geology, collect samples for future return to Earth and pave the way for human exploration of Mars.

Last month, multiple important tests were performed on the Mars 2020 rover aeroshell inside the PHSF, including measuring the center of gravity and moments of inertia on the spin table, as well as lift activities. The rover’s heat shield and back shell arrived at Kennedy from Lockheed Martin Space in Denver, Colorado, on Dec. 11, 2019. The spacecraft was manufactured at JPL.

Check out the mission’s website for more in-depth information on the Mars 2020 rover.

NASA Continues With Important Testing of Mars 2020 Rover Aeroshell

Mars 2020 rover aeroshell spin table tests
At NASA’s Kennedy Space Center, tests to measure the center of gravity and moments of inertia for the Mars 2020 rover aeroshell are performed on the spin table inside the Florida spaceport’s Payload Hazardous Servicing Facility. Photo credit: NASA/Kim Shiflett

Tests to measure the center of gravity and moments of inertia for the Mars 2020 rover aeroshell were performed on the spin table inside the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center in Florida.

The rover is being manufactured at NASA’s Jet Propulsion Laboratory in California and, once complete, will be delivered to Kennedy in mid-February. The rover’s heat shield and back shell arrived at Kennedy last month.

The mission is scheduled to launch this summer from Cape Canaveral Air Force Station aboard a United Launch Alliance Atlas V 541 rocket. NASA’s Launch Services Program based at Kennedy is managing the launch.

Carrying seven different scientific instruments, the Mars 2020 rover will land on the Red Planet on Feb. 18, 2021. More information can be found on the mission’s website.

Mars 2020 Rover Lift Activities Performed at Kennedy Space Center

Mars 2020 rover aeroshell lift activities
Lift activities for the Mars 2020 rover aeroshell are conducted inside Kennedy Space Center’s Payload Hazardous Servicing Facility on Jan. 14, 2020. Photo credit: NASA/Kim Shiflett

Lift activities for the Mars 2020 rover aeroshell were conducted inside Kennedy Space Center’s Payload Hazardous Servicing Facility. The activities included installing the inverted lift fixture and lifting the aeroshell assembly to the spin table for mass properties measurements.

The Mars 2020 rover mission will launch aboard a United Launch Alliance Atlas V 541 rocket from Cape Canaveral Air Force Station in Florida this summer. NASA’s Launch Services Program based at Kennedy will manage the launch.

About the size of a car with dimensions similar to the Curiosity rover, the Mars 2020 rover will land on the Red Planet on Feb. 18, 2021.

Visit the mission website for more information.

Mars 2020 Rover’s Heat Shield, Back Shell Arrive at Florida Spaceport

The heat shield and back shell for the Mars 2020 rover
The heat shield and back shell for the Mars 2020 rover are unboxed inside the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center in Florida on Dec. 13, 2019. Photo credit: NASA/Ben Smegelsky

Two vital pieces of equipment for the Mars 2020 rover were flown from Lockheed Martin Space in Denver, Colorado, and recently delivered to the agency’s Kennedy Space Center.

The rover’s heat shield and back shell arrived at Kennedy’s Launch and Landing Facility (formerly the Shuttle Landing Facility) on Dec. 11, 2019, and were then transported to the Florida spaceport’s Payload Hazardous Servicing Facility. Built by Lockheed Martin Space, these two essential parts of the spacecraft will protect the rover during its passage to Mars. The Mars 2020 rover is being manufactured at NASA’s Jet Propulsion Laboratory (JPL) in California and, once complete, will be delivered to Kennedy in mid-February, 2020.

Unboxing of the Mars 2020 heat shield and back shell
The heat shield and back shell will protect the Mars 2020 rover during its passage to Mars. Photo credit: NASA/Ben Smegelsky

As the spacecraft descends through the Martian atmosphere, the heat shield will encounter extreme amounts of friction, creating temperatures as high as about 3,200 degrees Fahrenheit. The back shell contains several elements critical to landing the rover, including the parachute and antennas for communication. Some of these key components will be integrated in the months to come by the NASA-JPL team at Kennedy.

The mission is scheduled to launch in the summer of 2020 from Cape Canaveral Air Force Station aboard a United Launch Alliance Atlas V 541 rocket, procured by NASA’s Launch Services Program. It will land on the Red Planet on Feb. 18, 2021.

About the size of a car with dimensions similar to the Curiosity rover, the Mars 2020 rover will carry seven different scientific instruments. Developed under NASA’s Mars Exploration Program, the mission aims to search for signs of past microbial life, characterize the planet’s climate and geology, collect samples for future return to Earth and pave the way for human exploration of Mars.

Visit the mission website for more information.