NASA Helicopter Ready to Hitch a Ride to the Red Planet

NASA's Mars Helicopter inside Kennedy Space Center's Payload Hazardous Servicing Facility
NASA’s Mars Helicopter is installed on the agency’s Mars Perseverance rover inside the Payload Hazardous Servicing Facility at Florida’s Kennedy Space Center on April 6, 2020. Photo credit: NASA/JPL

NASA’s Mars Helicopter will make history in about 10 months when it becomes the first aircraft to fly on another world.

Now it has its ride to the Red Planet.

On April 6, 2020, the helicopter was attached to the belly of the agency’s Mars Perseverance rover. The installation took place inside the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center in Florida, where the rover has remained since its Feb. 9, 2020, arrival from NASA’s Jet Propulsion Laboratory in Pasadena, California.

NASA Mars Helicopter and Mars Perseverance rover at Kennedy Space Center
NASA’s Mars Perseverance rover, carrying the agency’s Mars Helicopter, will touch down on the Red Planet on Feb. 18, 2021. Photo credit: NASA/JPL

The twin-rotor, solar-powered helicopter weighs less than 4 pounds; the total length of its rotors is about 4 feet, tip to tip. Its main purpose is a technology demonstration. After Perseverance safely lands on Mars, the helicopter will be released to perform the first in a series of flight tests that will take place during 30 Martian days (a day on Mars is about 40 minutes longer than a day on Earth).

For history’s first flight experimental flight test in the thin Martian atmosphere (less than 1% the density of Earth’s), the helicopter is tasked with hovering in the air a few feet off the ground for 20 to 30 seconds before landing. It is designed to fly on its own, without human control, using minimal commands from Earth sent in advance.

With the helicopter safely tucked away and covered by a shield to protect it during descent and landing, Perseverance will touch down on the Red Planet on Feb. 18, 2021. Liftoff aboard a United Launch Alliance Atlas V 541 rocket is targeted between July 17 and Aug. 5 from Cape Canaveral Air Force Station.

NASA’s Launch Services Program based at Kennedy is managing the launch. For more in-depth information, visit the mission’s website.

Wheels, Parachute Installed on Mars Perseverance Rover

Wheels are installed on NASA’s Mars Perseverance rover inside Kennedy Space Center’s Payload Hazardous Servicing Facility on March 30, 2020. Photo credit: NASA/JPL

The assembly, test and launch operations team from NASA’s Jet Propulsion Laboratory is working at NASA’s Kennedy Space Center in Florida, making significant strides in preparing the agency’s Mars Perseverance rover for its planned July 2020 launch. Final assembly and testing of the rover continue at Kennedy, including the recent installation of its wheels and parachute.

The rover received its six flight wheels on March 30. The wheels are re-engineered versions of the ones NASA’s Mars Curiosity rover has been using on the Red Planet.

Perseverance, which was developed under NASA’s Mars Exploration Program, will liftoff aboard a United Launch Alliance Atlas V 541 rocket from Cape Canaveral Air Force Station. NASA’s Launch Services Program based at Kennedy is managing the launch. The rover will land on Mars on Feb. 18, 2021.

Millions Tag Along for NASA’s Mars 2020 Mission

"Send Your Name to Mars" logo installation
The “Send Your Name to Mars” logo is installed on the Mars Perseverance rover on March 16, 2020, inside the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center in Florida. Photo credit: NASA/JPL

When the Mars Perseverance rover begins its seven-month journey to the Red Planet in mid-July, it will be carrying the names of more than 10 million people throughout the world.

Those names were etched onto three microchips, which were placed aboard Perseverance. On March 16, 2020, inside the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center in Florida, the “Names to Mars” logo was installed on the rover.

Those who took advantage of the special public promotion also had the opportunity to receive a souvenir boarding pass and obtain “frequent flyer points” as part of humanity’s first round trip to another planet. In total, 10,932,295 people submitted their names. Turkey (2,528,844), India (1,778,277) and the United States (1,733,559) all had more than 1 million submissions.

NASA's Mars Perseverance rover at Kennedy Space Center
More than 10 million names were etched onto three microchips, which were placed aboard Perseverance. Photo credit: NASA/JPL

Perseverance will search for signs of past microbial life, characterize the planet’s climate and geology, collect samples for future return to Earth, and pave the way for human exploration of the Red Planet.

The rover will land on the Red Planet on Feb. 18, 2021. Liftoff aboard a United Launch Alliance Atlas V 541 rocket is targeted for mid-July from Cape Canaveral Air Force Station. NASA’s Launch Services Program based at Kennedy is managing the launch.

Weighing more than 2,300 pounds, Perseverance is about the size of a car, with dimensions similar to the Curiosity rover. It was developed under NASA’s Mars Exploration Program.

Earlier this month at Kennedy, activities to measure mass properties of the Cruise Stage vehicle were performed on the spin table inside the Payload Hazardous Servicing Facility. Successful testing also was performed on NASA’s Mars Helicopter, which will be attached to Perseverance. The helicopter will be the first aircraft to fly on another planet.

Please visit the mission’s website for more information on the Mars 2020 mission.

Mars 2020 Rover Undergoing Processing at Florida Spaceport

Mars 2020 rover at Kennedy Space Center
The launch of the Mars 2020 rover is targeted for mid-July. Photo credit: NASA/Kim Shiflett

Soon after its arrival to NASA’s Kennedy Space Center last week, the Mars 2020 rover was moved to the Florida spaceport’s Payload Hazardous Servicing Facility, where it has been undergoing processing for its mission later this year. The spacecraft was flown to Kennedy from California aboard a C-17 aircraft on Feb. 12.

Targeted for mid-July 2020, the mission will launch aboard a United Launch Alliance Atlas V 541 rocket from Cape Canaveral Air Force Station. The launch is managed by the Launch Services Program.

The Mars 2020 rover will search for signs of past microbial life, characterize the planet’s climate and geology, collect samples for future return to Earth and pave the way for human exploration of Mars.

Mars 2020 Rover Makes its Way to Kennedy

Mars 2020 rover arrival at Kennedy
The Mars 2020 rover is offloaded from a C-17 aircraft at the Launch and Landing Facility, formerly the Shuttle Landing Facility, at NASA’s Kennedy Space Center in Florida on Feb. 12, 2020. Photo credit: NASA/Cory Huston

Leaving from its temporary home at NASA’s Jet Propulsion Laboratory (JPL) in Pasadena, California, the Mars 2020 rover completed a cross-country trip Wednesday afternoon. It arrived on a C-17 aircraft to the Launch and Landing Facility (formerly the Shuttle Landing Facility) at NASA’s Kennedy Space Center in Florida.

Mars 2020 rover delivered to Kennedy Space Center
After its arrival at Kennedy from California, the Mars 2020 rover is prepared to be moved to the Florida spaceport’s Payload Hazardous Servicing Facility for unboxing. Photo credit: NASA/Cory Huston

The spacecraft was then moved to Kennedy’s Payload Hazardous Servicing Facility (PHSF), where it is being unboxed today. Before making the trek to the Florida spaceport, the Mars 2020 rover traveled about 70 miles southeast from JPL to March Air Reserve Base.

Carrying seven different scientific instruments, the Mars 2020 rover will land on the Red Planet on Feb. 18, 2021. Liftoff, aboard a United Launch Alliance Atlas V 541 rocket, is targeted for mid-July from Cape Canaveral Air Force Station. NASA’s Launch Services Program based at Kennedy is managing the launch.

About the size of a car with dimensions similar to the Curiosity rover, the Mars 2020 rover was developed under NASA’s Mars Exploration Program. The mission aims to search for signs of past microbial life, characterize the planet’s climate and geology, collect samples for future return to Earth and pave the way for human exploration of Mars.

Last month, multiple important tests were performed on the Mars 2020 rover aeroshell inside the PHSF, including measuring the center of gravity and moments of inertia on the spin table, as well as lift activities. The rover’s heat shield and back shell arrived at Kennedy from Lockheed Martin Space in Denver, Colorado, on Dec. 11, 2019. The spacecraft was manufactured at JPL.

Check out the mission’s website for more in-depth information on the Mars 2020 rover.

NASA Continues With Important Testing of Mars 2020 Rover Aeroshell

Mars 2020 rover aeroshell spin table tests
At NASA’s Kennedy Space Center, tests to measure the center of gravity and moments of inertia for the Mars 2020 rover aeroshell are performed on the spin table inside the Florida spaceport’s Payload Hazardous Servicing Facility. Photo credit: NASA/Kim Shiflett

Tests to measure the center of gravity and moments of inertia for the Mars 2020 rover aeroshell were performed on the spin table inside the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center in Florida.

The rover is being manufactured at NASA’s Jet Propulsion Laboratory in California and, once complete, will be delivered to Kennedy in mid-February. The rover’s heat shield and back shell arrived at Kennedy last month.

The mission is scheduled to launch this summer from Cape Canaveral Air Force Station aboard a United Launch Alliance Atlas V 541 rocket. NASA’s Launch Services Program based at Kennedy is managing the launch.

Carrying seven different scientific instruments, the Mars 2020 rover will land on the Red Planet on Feb. 18, 2021. More information can be found on the mission’s website.

Mars 2020 Rover Lift Activities Performed at Kennedy Space Center

Mars 2020 rover aeroshell lift activities
Lift activities for the Mars 2020 rover aeroshell are conducted inside Kennedy Space Center’s Payload Hazardous Servicing Facility on Jan. 14, 2020. Photo credit: NASA/Kim Shiflett

Lift activities for the Mars 2020 rover aeroshell were conducted inside Kennedy Space Center’s Payload Hazardous Servicing Facility. The activities included installing the inverted lift fixture and lifting the aeroshell assembly to the spin table for mass properties measurements.

The Mars 2020 rover mission will launch aboard a United Launch Alliance Atlas V 541 rocket from Cape Canaveral Air Force Station in Florida this summer. NASA’s Launch Services Program based at Kennedy will manage the launch.

About the size of a car with dimensions similar to the Curiosity rover, the Mars 2020 rover will land on the Red Planet on Feb. 18, 2021.

Visit the mission website for more information.

Mars 2020 Rover’s Heat Shield, Back Shell Arrive at Florida Spaceport

The heat shield and back shell for the Mars 2020 rover
The heat shield and back shell for the Mars 2020 rover are unboxed inside the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center in Florida on Dec. 13, 2019. Photo credit: NASA/Ben Smegelsky

Two vital pieces of equipment for the Mars 2020 rover were flown from Lockheed Martin Space in Denver, Colorado, and recently delivered to the agency’s Kennedy Space Center.

The rover’s heat shield and back shell arrived at Kennedy’s Launch and Landing Facility (formerly the Shuttle Landing Facility) on Dec. 11, 2019, and were then transported to the Florida spaceport’s Payload Hazardous Servicing Facility. Built by Lockheed Martin Space, these two essential parts of the spacecraft will protect the rover during its passage to Mars. The Mars 2020 rover is being manufactured at NASA’s Jet Propulsion Laboratory (JPL) in California and, once complete, will be delivered to Kennedy in mid-February, 2020.

Unboxing of the Mars 2020 heat shield and back shell
The heat shield and back shell will protect the Mars 2020 rover during its passage to Mars. Photo credit: NASA/Ben Smegelsky

As the spacecraft descends through the Martian atmosphere, the heat shield will encounter extreme amounts of friction, creating temperatures as high as about 3,200 degrees Fahrenheit. The back shell contains several elements critical to landing the rover, including the parachute and antennas for communication. Some of these key components will be integrated in the months to come by the NASA-JPL team at Kennedy.

The mission is scheduled to launch in the summer of 2020 from Cape Canaveral Air Force Station aboard a United Launch Alliance Atlas V 541 rocket, procured by NASA’s Launch Services Program. It will land on the Red Planet on Feb. 18, 2021.

About the size of a car with dimensions similar to the Curiosity rover, the Mars 2020 rover will carry seven different scientific instruments. Developed under NASA’s Mars Exploration Program, the mission aims to search for signs of past microbial life, characterize the planet’s climate and geology, collect samples for future return to Earth and pave the way for human exploration of Mars.

Visit the mission website for more information.