The full moon sets Oct. 16 over the Antares rocket at the launch pad in Virginia. Photo Credit: (NASA/Bill Ingalls)
The countdown has begun for Orbital ATK’s Antares rocket, with the Cygnus cargo spacecraft on top, and is progressing smoothly today. There are no technical concerns with the rocket or spacecraft and weather is 100 percent “go.”
Liftoff is scheduled to occur during a five minute window beginning at 7:40 p.m. EDT from the Mid-Atlantic Spaceport’s Pad 0A at NASA’s Wallops Flight Facility in Virginia.
Live coverage of the launch on NASA TV will begin at 6:45 p.m. at: https://www.nasa.gov/ntv
Cygnus is loaded with about 5,100 pounds of science investigations, food, supplies and hardware for the space station and its crew.
When Cygnus arrives to the space station, on Sunday, Oct. 23, Expedition 49 Flight Engineers Takuya Onishi of the Japan Aerospace Exploration Agency and Kate Rubins of NASA will grapple the spacecraft. They will use the space station’s robotic arm to take hold of the Cygnus, dubbed the S.S. Alan Poindexter. After Cygnus’ capture, ground controllers will command the station’s arm to rotate and install it on the bottom of the station’s Unity module.
The Cygnus spacecraft will spend about 5 weeks attached to the space station. Cygnus will remain at the space station until November, when the spacecraft will depart the station and initiate the second spacecraft fire safety investigation, Saffire-II, and then dispose of approximately several tons of trash during its fiery reentry into Earth’s atmosphere.
Orbital ATK CRS-5 Countdown & Launch Highlights
The countdown uses both a range countdown clock (L Minus Clock) and a software sequencer (T Minus Clock). The launch countdown is initiated with the Range Clock at L minus 6 hours 15 minutes and is a running clock. The T Minus Clock is initiated at T minus 3 hours 10 minutes (sequencer start-up) and stops with built-in holds.
1:10 pm Report to stations
1:25 pm Open Checklist, begin countdown
3:10 pm Poll to Readiness for LV External Power On
3:55 pm Poll to initiate Loading Sequencer Timeline
4:00 pm Loading Sequencer Start
5:40 pm Enter into 20-minute built-in hold at T-1 hour, 30 minutes (L-2 hours)
6:00 pm Resume the count at T-1 hour, 30 minutes (L-1 hour, 40 minutes)
6:05 pm Start propellant loading at T-1 hour, 25 minutes (L-1 hour, 35 minutes)
6:45 pm NASA TV COVERAGE BEGINS
7:22 pm Enter into final 10-minute hold at T-8 minutes (L-18 minutes)
7:30 pm Poll for readiness to proceed with the final countdown (L-10 minutes)
7:32 pm Start final countdown at T-8 minutes
7:37 pm Initiate Auto Sequence Handoff for the Terminal Count (T-3:30)
7:40 pm LAUNCH
7:44 pm MECO on Antares first stage
7:44 pm Stage 1 Sep
7:44 pm Fairing Sep
7:44 pm Interstage Sep
7:44 pm Second stage ignition
7:47 pm Stage 2 Burnout/orbit insertion
7:49 pm Cygnus Sep from second stage
9:05 pm NASA TV Commentary resumes for Solar Array Deploy
~9:10 pm Solar Array Deployment Begins
~9:40 pm Solar Array Deployment Ends
~9:45 pm Commentary ends
~10:00 pm Post-launch news conference