Fine Motor Skills: Kelly executed a Fine Motor Skills experiment this morning when he performed a series of interactive tasks on a touchscreen tablet. Fine Motor Skills studies how fine motor performance in microgravity trends/varies over the duration of a six-month and year-long space missions; how fine motor performance on orbit compares with that of a closely matched participant on Earth; and how performance trends/varies before and after gravitational transitions, including the periods of early flight adaptation and very early/near immediate post-flight periods.
Journals: Kelly completed a Journal entry today in support of the Behavioral Issues Associated with Isolation and Confinement: Review and Analysis of Astronaut Journals experiment. Journals obtains information on behavioral and human issues that are relevant to the design of equipment and procedures and sustained human performance during extended-duration missions. Results provide information which helps prepare for future missions to low-Earth orbit and beyond.
Regenerative Environmental Control and Life Support System (ECLSS) Recycle Tank Remove and Replace (R&R): Kelly R&Rd the Water Recovery System (WRS) recycle tank including the brine and distillate 100 micron filters as part of this regularly scheduled maintenance.
S1 and P1 Multiplexer/Demultiplexer (MDM) Patch Updates – Today patches were uploaded to the S1-1, S1-2, P1-1, and P1-2 MDMs to prevent the Solenoid Driver Output (SDO) retry counter from erroneously incrementing when an External Thermal Control System (ETCS) loop isolation valve is commanded. The software issue with the incrementing SDO retry counter was highlighted in January 2015 when the incrementing counter resulted in an Ada exception in the P1-2 MDM
Today’s Planned Activities
All activities were completed unless otherwise noted.
- Verification of anti-virus scan results on Auxiliary Computer System (ВКС) laptops
- Start [АСН-К] Data Recording Application
- RGN-REC TK – Transfer and Replacement
- REGENERATSIYA-1. Photography at Setup Location
- Saving Data stored on RSE-Med laptop before installation of SW version 4.1
- SEISMOPROGNOZ.. Downlink data from Control and Data Acquisition Module (МКСД) HDD (start)
- Bringing ODF up to date using ТКГ 428 (DC1) delivered files
- WRS Water Sample Analysis
- Crew handover conference
- FINEMOTR – Experiment Ops
- ASEPTIC. Transfer of Kits and Photography of Medium before the experiment
- CASKAD. Removal from Thermostat (+ 4°С deg) and Setup in Glovebox
- ASEPTIC. Setup in the Glovebox
- ASEPTIC. Activation of Bench Cleaning
- ASEPTIC Photo Edit and Downlink
- ASEPTIC. Switching TBU-V Thermostat No.4 to +37°С setting
- СОЖ Maintenance
- CASKAD. Activation of Thermostat at +26°С deg
- TOCA Data Recording
- WRS – Recycle Tank Fill from EDV
- Verification of ИП-1 Flow Sensor Position
- ASEPTIC Repositioning Equipment in the Box
- MELFI – Sample Insertion
- ASEPTIC. Glovebox Sterilization Disable and Surface Sampling
- WRS – Recycle Tank Fill from EDV
- CASKAD. Fill Bioreactor, Remove from Glovebox-S, and Setup in Thermostat at +26°С deg C.
- CASKAD. Photography during filling
- JRNL – Journal Entry
- Transfer of Urine from RS/USOS EDV-U and brine from EDV-US to ТГК 425 (Aft) Rodnik БВ2 Tank. Flushing КВ2 connector with water from EDV-TECH
- В3 Fan Screen Cleaning in MRM2
- WRS – Recycle Tank Fill from EDV
- ASEPTIC. Surface sample collection and preparing for of air sampling before sterilization
- OASIS – Hard Drive Exchange
- On-orbit Hearing Assessment using EARQ
- RGN REC-TNK – Removal of depress hose for nominal operations
- MELFI – Sample Insertion
- RGN – Initiate drain into EDV
- SEISMOPROGNOZ. Download data from Control and Data Acquisition Module (МКСД) HDD (end) and start archiving
- MELFI – Samples Inventory
- RGN – Terminate water drain into EDV
- WRS – Recycle Tank Fill from EDV
- Air sampling using АК-1М sampler in SM, FGB
- EXPRESS failed light bulb replacement
- SM air sampling for FREON in SM and FGB using АК-1М sampler
- ASEPTIC. Monitoring Pump Automatic Shut off
- Saving Data ((personal photo, video, etc.) , stored on RSE-Med laptop before installation of SW version
- ASEPTIC. Retrieving samples from box and placing in thermostat
Completed Task List Items
- Crew Support LAN (CSL) SeaTools Scan
Ground Activities
All activities were completed unless otherwise noted.
- OASIS ops
- P1 MDM Patch load
- S1 MDM Patch load
Three-Day Look Ahead:
- Wednesday, 07/08: VEG-01, Plant Gravity Sensing 2 sample prep, Capillary Beverage
- Thursday, 07/09: NanoRacks CubeSat Deployer install on MPEP, training for Emergency Response
- Friday, 07/10: Plant Gravity Sensing 2 Sample Insertion, N3 CDRA leak check
QUICK ISS Status – Environmental Control Group:
|
Component |
Status |
|
Elektron |
On |
|
Vozdukh |
Manual |
|
[СКВ] 1 – SM Air Conditioner System (“SKV1”) |
On |
|
[СКВ] 2 – SM Air Conditioner System (“SKV2”) |
Off |
|
Carbon Dioxide Removal Assembly (CDRA) Lab |
Standby |
|
Carbon Dioxide Removal Assembly (CDRA) Node 3 |
Operate |
|
Major Constituent Analyzer (MCA) Lab |
Shutdown |
|
Major Constituent Analyzer (MCA) Node 3 |
Operate |
|
Oxygen Generation Assembly (OGA) |
Standby |
|
Urine Processing Assembly (UPA) |
Process |
|
Trace Contaminant Control System (TCCS) Lab |
Off |
|
Trace Contaminant Control System (TCCS) Node 3 |
Full Up |