ISS Daily Summary Report – 9/13/2021


4-Bed CO2 scrubber:  The crew reviewed the big picture words and procedures for the installation planned later this week.  The Four Bed CO2 Scrubber demonstrates a technology for removing carbon dioxide (CO2) from the atmosphere on a spacecraft. The technology is based on the current system in use on the International Space Station (ISS) with mechanical upgrades in absorption beds, heater elements, and valves and use of an improved zeolite absorbent to reduce erosion and dust formation. A goal for this next-generation system is continuous operation for 20,000 hours without a failure, and this technology is a step toward that goal.

Cell Science-04: Over the weekend, the crew concluded the 61-day investigation.  Experiment samples will be returned to the ground on SpX-23.  The Hypsibius exemplaris tardigrade (tardigrades are commonly called ‘water bears’) is the model organism for studying biological survival under the most extreme environmental stress conditions on Earth and in space.  The objective of the Cell Science-04 investigation is to characterize the molecular biology of short term and multigenerational survival in the space environment by identifying genes that are required for adaptation and survival in high stress environments.  The findings from this study can be applied to understanding the stress factors of humans in the space environment, and identification of countermeasures.

Combustion Integrated Rack/Advanced Combustion via Microgravity Experiments/Cool Flames Investigation with Gasses (CIR/ACME/CFI-G part 2):  Following successful repairs last week, this week the crew removed an empty propane fuel bottle and installed a butane fuel bottle, allowing the continuation of the experiment.  Spherical Cool Diffusion Flames Burning Gaseous Fuels (Cool Flames Investigation with Gases) observes the chemical reactions of cool diffusion flames. Diffusion flames are created by supplying fuel to a burner and mixing in ambient air for combustion. Cool flames, which burn at extremely low temperatures, are nearly impossible to create in Earth’s gravity, but are easily created in microgravity; studying them may improve the understanding of combustion and fires on Earth.

ESA Blob:  The crew installed the experiment hardware and initiated a Blob experiment session by injecting water into the appropriate areas.  The goal of the Blob investigation is to observe the influence of microgravity on the Blob’s (a unicellular organism whose scientific name is Physarum polycephalum) behavior when it explores its environment or when it eats. A ground experiment takes place in schools and the results are compared against the results of the International Space Station conclusions. The final goal is to motivate students from France and other European Space Agency (ESA) Member States to study the Biological sciences.

Fluids Integrated Rack/Light Microscopy Module/Advanced Colloids Experiment-Temperature control (FIR/LMM/ACE-T):  The crew removed the processed ACE-T9 module and installed an ACE-T1 module.  ACE-T1 studies tiny suspended particles which have been designed by scientists to connect themselves in a specific way to form organized structures within water. Materials having complex structures and unique properties potentially can be made with more knowledge of how these particles are joined and the conditions which control their behaviors. The particular type of particles used in ACE-T1 are referred to as Janus particles, named after the two-faced Roman god Janus, because these particles are said to have “two faces” as they possess two distinct types of properties. The Janus particles being studied have one half of their surface composed of hydrophilic groups (which interact with water) and the other half of hydrophobic groups (which are repelled from water). The microgravity environment on the International Space Station (ISS) provides researchers insight into the fundamental physics of micro particle self-assembly and the kinds of colloidal structures that are possible to fabricate. This in turn helps manufacturers on Earth in choosing which high-value material is worth investigating.

Rodent Research-Demo1 (RR-D1):  The crew gathered hardware, reviewed procedures, and set up the Life Science Glovebox (LSG) to support the RR-D1 experiment.  RR-D1 validates equipment and procedures related to the wound healing process investigation.  Normal skin function and wound healing are important for maintaining good health, but spaceflight may impair healing of wounds in astronauts.  Results from this investigation are intended to support design of a subsequent study on the effects of spaceflight on wound healing.

Veggie Monitor material review and photo: The crew took photos while performing Veggie Monitoring Surface Sample Collection operations.  Culture-based Environmental Monitoring of Crop-based Space Food Systems (Veggie Monitoring) collects microbial samples from the surface of the station’s Veggie plant production system in conjunction with quarterly Environmental Health System (EHS) sample collection. Longer exploration missions require space-based systems for growth of plants, and this investigation is expected to help establish requirements to protect these systems, plants, and crew from contamination.


USOS EVA 77: 4A IROSA Prep EVA: Yesterday, Sunday September 12th, ISS Commander Akihiko “Aki” Hoshide and crewmember Thomas Pesquet completed the 77th USOS EVA. The main goal of this EVA was to prepare the 4A Solar Array for a new ISS Roll-Out Solar Array (IROSA) by building and attaching the struts and mounting brackets that will hold the IROSA in place to the array frame. During the 6-hour and 54-minute EVA, the EV crew completed the following objectives:

  • Build the 4A Upper Bracket
  • Install the 4A Center Pad to Mast Canister
  • Install the 4A Left Struts
  • Install 4A Right Struts, MLIs, and Clamps
  • Airlock Pip Pin R&R (get ahead task)
  • Perform P1 FPMU R&R

Post-Extravehicular Activity (EVA) Activities: The crew completed multiple post-EVA activities after yesterday’s successful 4A IROSA Prep EVA. Their activities included: a post-EVA debrief conference with the EVA ground teams, a Z93 ORU safing activity, a PBA relocate, and a Crewlock depress/repress cue cards update activity.

Completed Task List Activities:


Today’s Ground Activities:
All activities are complete unless otherwise noted.

  • Special Purpose Dexterous Manipulator (SPDM) Stow
  • Space Station Remote Manipulator System (SSRMS) Walkoff
  • Special Purpose Dexterous Manipulator (SPDM) Unstow
  • ACE-T11 Module Configuration

Look Ahead Plan

Tuesday, September 14 (GMT 257)

  • APEX-08 HW Deactivation
  • Astrobee prep
  • Biofilms Deinstall
  • BIOMOLE Sample Part 3
  • ESA BLOB File transfer
  • Food Acceptability
  • Four Bed CO2 Scrubber
  • Genes in Space-8 Run 5
  • ManD reconfigure
  • Redwire Regolith Print tray remove
  • ROBO PRO Briefing
  • Rodent Research OBT and prep
  • SPECTRUM MTL hose removal
  • Standard Measures Saliva collect


  • EMU water recharge
  • Node 3 Smoke detector cleaning
  • EVA tool stow
  • Dragon cargo ops

Wednesday, September 15 (GMT 258)

  • BCM Robot Test
  • BIOMOLE BMS stow
  • Eklosion Water fill, t/s, and message photo
  • ESA EPO Touching Surfaces
  • ESA EPO BLOB data transfer
  • Food Acceptability
  • JEM Water Recovery Gas Trap Install
  • KUBIK MPCC deinstall
  • Kibo Robot Programming Challenge-2 final round
  • Rodent Research Demo-1 Experiment 1A and Hab restock
  • Standard Measures Saliva collect and Fecal Setup
  • Turbine CMM Module swap


  • EVA tool stow
  • Health Maintenance System (HMS) Ultrasound 2 Scan
  • IWIS RSU install in MLM

Thursday, September 16 (GMT 259)

  • CBEF-L LTL Box setup and VRU2 cable reconnect
  • Food Acceptability
  • Four Bed CO2 Integrated Hardware install
  • Fridge-2 label
  • ISS Experience EVA Z-Cam removal
  • LIDAL Relocate 3
  • NanoRacks Module-9 Ops 3
  • POLAR desiccant swap
  • PLT5 and ELT5 reconnect config
  • Rodent Access unit clean
  • SAIBO CO2 QD Demate
  • Standard Measures Saliva, body, fecal collect
  • Turbine CMM Module removal and Ice berg-2 Insert


  • Oxygen Generation System (OGS) Water Sample
  • EVA Airlock Deconfiguration
  • EVA Airlock restow
  • HMS Optical Coherence Tomography (OCT2) Exam

Today’s Planned Activities:
All activities are complete unless otherwise noted.

  • Biofilms Kubik 6 status check
  • Veggie Monitoring Reference Material Review
  • Environmental Health System (EHS) – Surface Sample Kit (SSK) Collection/Incubation
  • Veggie Monitoring Surface Sample Collection Historical Documentation Photography
  • ISS HAM Kenwood Radio Power Up
  • Combustion Integrated Rack Manifold #4 Bottle Replacement
  • Z93 ORU Safing
  • Waste and Hygiene Compartment (WHC) Manual Fill Initiation
  • Environmental Health System (EHS) – Microbial Air Sampler (MAS) Kit Sample Collection
  • Relocate PBAs post EVA
  • Waste and Hygiene Compartment (WHC) Manual Fill Termination
  • JEM Common Gas Support Equipment (CGSE) Upper CO2 Gas Supply Stop.
  • Four Bed CO2 Scrubber Installation Big Picture Words and Procedure Review
  • Rodent Research Activity Review
  • HRF Rack Hardware Inspect
  • Ring-Sheared Drop MELFI Sample Retrieve
  • Microgravity Science Glovebox Activation
  • ACE-T11 Module Configuration
  • Russian Stowage Transfer
  • Health Maintenance System (HMS) Med Kit Relocate
  • Public Affairs Office (PAO) Event in High Definition (HD) in Columbus
  • APEX-08 Clean and Dry
  • Extravehicular Activity (EVA) Debrief