On Jan. 15, NASA’s James Webb Space Telescope’s Near Infrared Imager and Slitless Spectrograph (NIRISS) experienced a communications delay within the science instrument, causing its flight software to time out. Following a full investigation by NASA and Canadian Space Agency (CSA) teams, the cause was determined to likely be a galactic cosmic ray, a form of high-energy radiation from outside our solar system that can sometimes disrupt electrical systems. Encountering cosmic rays is a normal and expected part of operating any spacecraft. This cosmic ray event affected logic in the solid-state circuitry of NIRISS electronics known as the Field Programmable Gate Array. Webb engineers determined that rebooting the instrument would bring it back to full functionality.
After completing the reboot, NIRISS telemetry data demonstrated normal timing, and to fully confirm, the team scheduled a test observation. On Jan. 28, the Webb team sent commands to the instrument to perform the observation, and the results confirmed on Jan. 30 NIRISS is back to full scientific operations.
“NASA and CSA partnered to approach the problem as technically possible, using a detailed consideration of all areas of operation of the instrument. They analyzed all possible methods to safely recover the electronics. When performing the operation, reviews were held at each intermediate step. We are now happy to report that Webb’s NIRISS instrument is back online, and is performing optimally,” said Julie Van Campen, Webb Integrated Science Instrument Module (ISIM) systems engineer at NASA’s Goddard Space Flight Center in Greenbelt, Maryland.